Procedure of Removal of Tinting
There is unanimity in the fact of the importance of the window tinting. Especially those who living at the torrid belt requires tinting first to steer clear of the extreme heat of the sunlight.
Vice versa, there is also the requirement of the removal of the tint from the vehicle. It is not an easy task. After the removal of film, it shows that the cabs look odd and awkward. So prior to take the removal procedure, one should take the pre-emptive measures. First, one should make the necessary arrangements of tool box and suppliers. A knife will be required to peel the film off the outer hull of the window of the cars.
With the help of utility knife equipped with a large open blade or X-Acto knife are needed to start the peeling of the coating. There must be the availability of a number of black thirty gallon trash bags. There should be the arrangement of paper, towels, gas cleaner, steel wool pads, a drop cloth and ammonia. If someone has some hygienic problem in the matter of usage of ammonia he can opt for other products/liquids containing ammonia elements.
To get the tinting soft and wet, the rinsing of the rear-side window panes by water will be much more effective. Then let the trash bag opened and cover the window. Knife and scissors are required to cut the bag and to get it fitted with the window pane. Inside, the surface of the rear seats should be hoodwinked with a cover so as to prevent any further damage.
Next, a jet of ammonia will be sprayed on the window glasses after covering the face with the mask just to prevent the detrimental effect of the ammonia spray. Again trash bags to be fitted on the inside of the window. However, the good availability of sunlight can make the tinting process smooth. Halogen lamps can be used in absence of sunlight.